Building materials catalogue

Concrete batched at the plant and delivered on site at the strength the project calls for, not whatever comes out. Conventional, high-strength, paving, ultra-rapid and custom mixes.

Pumping equipment to place concrete where the truck cannot reach: roofs, interior courtyards, elevated slabs and long runs.

Microfibres distributed uniformly through the mix to control microcracking and deliver more durable floors, crack-free and with less maintenance.

Grey cement in 42.5 and 50 kg bags and masonry mortar — the base of every build — in the brand and volume your project needs.

Calidra hydrated lime, the ingredient that makes mortar work better, bond better and not stain the wall.

Construction gypsum with high adhesion on block, brick and concrete, easy to apply and covering more square metres per bag.

Concrete block in four sizes, produced at our own plant in Tijuana. Consistent, strong units available by the pallet.

High-porosity stucco-type mortars with integral colour, applied directly over block, brick or concrete, skipping the render step.

The complete line of reinforcing steel and structural hardware: rebar, mesh, prefab columns, wire, chain and nails.

Deformed rebar for concrete reinforcement: the element that supplies the tensile strength concrete lacks.

Two families in one line: welded mesh as floor reinforcement and chain-link mesh for perimeter fencing.

The structural hardware that ties, closes and secures: wire rod, annealed wire, barbed wire and galvanised chain.

The full range of construction nails plus ready-to-place prefabricated steel columns.

Polymer-modified adhesive mortars for every unit and every substrate: tile, porcelain, marble, glass mosaic and pools.

Grouting mortars with integral pigment, liquid repellency and an excellent-hardness finish, from 1.6 mm joints.

Advanced-bond adhesive mortars to fix and coat boards, panels and decorative elements, with a texturable finish.

Elastomeric and asphalt waterproofing that also reflects heat: protecting the roof from leaks and from temperature.

Three panels for three conditions: dry interior, wet area and exposed exterior. Each with the core the job requires.